Spider Series For Competition
NHF- Spider Sport
A well-balanced performance Spider for today’s demanding dressage and cones competitions at the same time keeping weight to a minimum.
Starting at $7,330
(Starting at 395 lbs for medium pony before shafts added)
Enhanced European-Styled Performance Design Features
- Wheels- Available in 55 cm – 95 cm depending on pony size
- Rear BIT Brakes
- Parking Brake and No-Rust Rotors
- Suspension- Front 3-Point Spring System, Rear- Double Elliptic Tightened
- Adjustable Box Seat with Two Cushions and Seat Cover
- Removable Groom Seat with Low Center of Gravity and Step
- Lamp Holders
- Removable Fenders
- “Light” Adjustable Metal Shafts with Presentation or Closed-End Loops
- Metal Single Tree
- Complimentary Tool Pouch with Tools
- Choice Paint, Pin Striping, Wood Stain Trim and Upholstery Color
The first option and most common, is adjusted by a small hand wheel which the navigator or groom operates. A small brake master cylinder provides hydraulic pressure to a small motorcycle type caliper which engages a brake disk attached to the fifth wheel.
The second option of the hydraulic fifth wheel brake pedal is operated by the driver by means of an extra brake pedal that operates a small master cylinder to provide hydraulic pressure to a small motorcycle type caliper which engages a brake disk attached to the fifth wheel. This option, like the hand wheel operated by the navigator/groom is quite effective, the braking action is instant when the pedal is depressed and instant off when the pedal is released.
The wheel and pedal operated 5th wheel brakes are available together.
The “manometer’ permits you to set the desired amount of pressure on the fifth wheel for both the pedal operated by the driver or the hand wheel operated by the navigator.
The pedal operated hydraulic fifth wheel brake, which can help provide a straight rein back in dressage, is also available on Marathon carriages. May be just may be enough help to bring home the blue!!!
NOTE: If you would like stainless to reduce weight but choose to have it painted vs. polished the pricing is reduced.
The conversion is relatively easy, 1) remove the standard groom seat by loosening the two set screws 2) remove the rear platform floor plate, six set screws and 3) install the rumble seat (two set screws) . The standard groom seat can still be removed as before and replaced with the Wicker basket if no groom is required. The added cost for this option including the extra rumble seat is $415
Contact us for custom-fitted carriage quote! We will expertly match features tailored to you and your equine partners’ needs.
*Carriage prices are subject to change and do not include delivery to final destination from Windsor, SC, or State sales tax, where applicable.